Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
63
Whilst counterholding the adjusting
bolts with a screwdriver, tighten
nuts on the appliance door at the
top with a screwdriver.
Attach the appliance door and the
door panel using screws through re-
taining brackets:
- Drill holes in the door panel (mark the
position of the holes first).
- Screw in the short particle board
screws (4x14mm).
Align the door panel along the depth
plane Z: loosen the screws in the long
slots at the top of the appliance
door as well as under the appli-
ance door. By moving the door
panel, create a gap of 1/16" (2mm)
between the door panel and the front
edge of the niche. Align according to
the adjacent door panels.
Close the door, check it is fastened
correctly, and align it with adjacent
door panels.
Tighten all the screws again.
Loading ...
Loading ...
Loading ...