Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
59
The foam ensures the airflow is
separated to prevent malfunctioning
of the appliance.
Insert the piece of foam supplied.
Reinstall the toe-kick facing, but
do not secure it in position yet.
Without a continuous toe-kick facing:
Pull the toe-kick facing forward un-
til the ventilation slats are in align-
ment with the adjacent cabinet toe-
kick facings.
Hold the toe-kick facing securely and
screw it into place on the right and
left using the bolts supplied.
With a continuous toe-kick facing:
Push the toe-kick facing right up
against the appliance and screw it
into place on the right and left using
the bolts.
Installing a continuous toe-kick fac-
ing
The appliance is ventilated through a
ventilation grille in its toe-kick.
The ventilation grille must never be
obstructed.
If a continuous toe-kick facing is to be
installed, a suitable ventilation gap will
need to be cut into it for the appli-
ance's ventilation grille.
Trim the toe-kick facing (U) to the cor-
rect height.
Adjust the height (V) along the niche
width (W) underneath the appliance
toe-kick facing.
Loading ...
Loading ...
Loading ...