Loading ...
Loading ...
INSTALLATION REQUIREMENTS
Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with any
tools listed here.
All Installations
Tools needed:
Pliers
Phillips
screwdriver
5A6"and 1/4"
nut drivers or _Sr _
hex sockets
Measuring tape _
or ruler
10" adjustable wrench
tha! opens to _//-_
11/8 (2.9 cm)
Torx ®*T20 _screwdriver
Flat-blade
screwdriver
Utility knife
UL Listed/CSA
Approved twist-on _ _
wire connectors*
Small level
%" open-end
wrench
*Must be the proper size to connect your household wiring
to 16-gauge wiring in dishwasher.
Other useful items you may need:
[Flashlight_ Shallow _ Bath _-_i
Parts supplied:
Drain hose Iuram
clamps (2) inose
(1 large and
1 small)
I
#10XwI 2- under-
Phillips.head counter
screws (2)mounting
brackets
Make sure all these parts are included in the literature package.
1-®TORX and T20 are registered trademarks of Saturn Fasteners, Inc.
Parts needed:
3 _l 3 _J
Y8 Comprx Y4 hose
fitting: ContaCt your !ocal
sears store t0 purchase
Kit Number 1100g.
Other parts you may also need:
[il/2" "
--2 _ I Masking Orl
(3.81w5 cm) I duct tape
sc e :type I
ClamPS (3 maximum)1
NOTE: Parts available for purchase in plumbing supply stores.
Check local codes. Check existing electrical supply. See
"Electrical Requirements" section. It is recommended that
electrical connections be made by a licensed electrical installer.
In addition, for first-time installations
Toolsneeded:
Cordless drill
With 1/2,3/4
1
and 1V2 hol_
saw bits
Parts needed:
Copper tubing (%'! see "Electrical Requirements" section:
O.D.suggested) or I
flexible [)raided For Direct Wire: For PoWer Supp!y
Water supPly line use UL L!sted/ cord: use UL
CSA Approved Listed/CSA
I strain APPr°ved power
(,[._._k._._ _)_))_') I tofit% (2.2cm) supply cordkit
"_-_'__/ I hole marked for use With
I 'dishWasher
Loading ...
Loading ...
Loading ...