Loading ...
Loading ...
Loading ...
9
Using Your Steam Cleaner
Using Your Steam Cleaner
7
8
IMPORTANT: When the Steam Cleaner has run out of water,
steam, output will cease. Follow rell instructions (page 10)
to use your Steam Cleaner again.
Attaching Shoulder Strap
Using the detachable Shoulder Strap allows for
greater freedom of movement when both hands are
needed for cleaning tasks, or to reach higher places.
To attach Shoulder Strap to the Steam Cleaner,
simply snap Shoulder Strap hooks on the
connecting rings found on unit.
When using Steam Cleaner with the Shoulder
Strap, avoid rocking or tilting the unit excessively
as this may cause water to enter the hose and be
discharged along with the steam.
CAUTION: We recommend testing the weight of the Steam Cleaner
before using it with the Shoulder Strap. This is to prevent potential injury
and ensure it is not too heavy for you to carry comfortably.
Attaching Bristle Tray to Floor Brush
For rough or textured oor surfaces, the steam may not be sufcient to
dislodge dirt that is trapped within the surface of a rough or textured
oor. In order to dislodge dirt trapped in the surface, the Bristle Tray will
need to be attached to the bottom of the Floor Brush to help scrub the
rough or textured surface.
1. Unscrew the screws found on the bottom of the Floor Brush, remove the
smooth tray at the bottom of the Floor Brush.
2. Insert the Bristle Tray and
screw into place using the
screws.
Use the bristles at the bottom of
Floor Brush to help remove dirt
trapped within the oor surface.
Attach the Microbre Pad to
absorb the dirt. If the Microbre
Pad becomes too wet or dirty,
replace with a clean pad and
continue cleaning.
9
Steam Release
To release steam from the Steam Cleaner, slide
forward the trigger found on the Steam Gun.
Steam will continue to be released while the
trigger is in the forward position. To stop the steam,
slide the trigger backward.
Loading ...
Loading ...
Loading ...