Loading ...
Loading ...
Loading ...
14
Tool Caddy & Wall Bracket
Tool Caddy & Wall Bracket
The Wall Bracket can be permanently mounted to a wall or inside a
cupboard or closet. Slots on the underside of the Tool Caddy slide easily
on to hooks on the Wall Bracket, giving you convenient off-the-oor
storage.
Before attaching Wall Bracket, be sure that…
– there is enough room to accommodate the Steam Cleaner and
Tool Caddy with tools attached
– there is at least 2.5”/6.5 cm clearance ABOVE where Bracket is
mounted so the unit can slide down on to the Bracket hooks
– the surface that the Bracket is being mounted on is strong enough
to hold the weight of the fully assembled Steam Cleaner
– you have obtained the necessary screws to mount the Bracket to
the wall or cabinet
NOTE: Be sure you are using the correct screw-type for the
surface to which you are mounting the Bracket. Check
manufacturer’s recommendations or ask someone at your
local hardware store what screw-type will work best, and be
sure the screw head is large enough to cover the holes.
Wall Bracket Installation:
• Hold Wall Bracket in desired location and mark the screw hole
positions with a pencil
(position Bracket over a
stud, if possible).
• Check levelness of
the location with a
carpenter’s spirit level.
• Screw the Wall Bracket
rmly in place.
B. Wall Bracket – Installation
*IMPORTANT*
The Tool Caddy MUST be installed on the Steam Cleaner before the
Wall Bracket can be used.
WARNING!
When storing the Steam Cleaner on the Wall Bracket, ensure that
any tools on the Tool Caddy are not in a dangerous position.
Example: Extension Tubes could be a hazard if the rack is mounted
at eye level.
Loading ...
Loading ...