Loading ...
Loading ...
Loading ...
Install hanging ball of downrod (A) into opening of
mounting bracket (C). Align one of the slots in
hanging ball with tab in mounting bracket (C).
DANGER: Failure to align one of the slots in
the ball with the tab may result in serious injury or
death.
10.
9
INITIAL INSTALLATION
WIRING
WARNING: To reduce the risk of fire, electrical shock or personal injury, wire connectors provided
with this fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If
your house wire is larger than 12-gauge or there is more than one house wire to connect to the
corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.
CAUTION: Be sure outlet box is properly grounded and that a ground (green or bare) wire is
present.
WARNING: If house wires are different colors than referred to in the following steps, stop
immediately. A professional electrician is recommended to determine wiring.
WARNING: Using a full range dimmer switch (not included) to control fan speed will cause a loud
humming noise from fan. To reduce the risk of fire or electrical shock, do NOT use a full range dimmer
switch to control fan speed.
1.
Make the necessary wiring connections for remote
control operation as detailed on the following page
and in Figure 1. For each wire connection, use one
of the wire connectors (AA), making sure to screw
wire connector (AA) on in a clockwise direction.
CAUTION: Assistance from another person is
recommended for this step.
Hardware Used
Wire Connector
x 6
AA
Slot
10
A
C
Tab
Loading ...
Loading ...
Loading ...