Loading ...
Loading ...
Loading ...
1.111
Before any action involving the windscreen (washing the vehicle, de-ic-
ing, cleaning the windscreen, etc.) return stalk 1 to position A (park).
Risk of injury and/or damage.
Windscreen washer
With the ignition on, pull stalk 1 to-
wards you.
A brief pull will trigger a single sweep
of the wipers, in addition to the wind-
screen washer.
A longer pull will trigger three sweeps
of the wipers followed, a few seconds
later, by a fourth, in addition to the wind-
screen washer.
WINDSCREEN WASH, WIPE (2/2)
A
B
C
D
1
1
Note:
There is a maintenance position for re-
placing wiper blades.
With the ignition on and the engine
off, lower windscreen wiper stalk 1 fully
(position D). The wiper arms stop in a
position away from the bonnet (please
refer to the information on “Windscreen
wiper blades” in Section 5).
Efficiency of a wiper blade
Check the condition of the wiper
blades. How long they last depends
on you:
– it must remain clean: clean the
blade and the screen regularly
with soapy water;
– do not use it when the screen is
dry;
– free it from the screen when it has
not been used for a long time.
Replace wiper blades as soon as
their performance starts to diminish:
Approximately every year (refer to
the information on “Wiper blades” in
section 5).
Precautions for using the
wipers
– In freezing or snowy weather,
clear the screen before starting
the wipers (risk of motor over-
heating);
– ensure that no objects are ob-
structing the travel of the blade.
Loading ...
Loading ...
Loading ...