Loading ...
Loading ...
Loading ...
12
BEFORE SETTING OVEN CONTROLS
Effortless™ Oven Rack system
Some models are equipped with a special oven rack
system that automatically extends the oven rack to assist in
access to your food items. This rack extends when the oven
door is opened or closed.
To assemble the Effortless™ Oven Rack system:
1. Locate all required parts. You will need the supplied
oven rack. Effortless™ Oven Rack is a flat rack with a
special dark coating on the left and right rack sides and
the two supplied chrome connector arms.
2. Be sure the oven is completely cool before proceeding.
Open the oven door.
3. Place the oven rack in positions 1,2, or 3. Be sure the
rack connector brackets are at the rear of the range and
pointing towards oven bottom Figure 2).
4. Assemble one connector arm at a time. With the oven
door open and the oven rack in place, install one end of
the connector arm to the hole in the door connector
bracket (Figure 1) and the other end in the hole in the
rack connector bracket (Figure 2 and as in Figure 3).
The oven rack may need to be adjusted in or out in the
rack position to match the length of the connector arm.
5. While holding the connector arm in place, twist the
connector arm so the ends of the connector arm point
upwards (See Figures 4 & 5). The connector arm
should now be locked into position.
6. Repeat steps 4 and 5 for the other connector arm.
7. Once both connector arms are properly in place, be
sure to test the oven rack operation by gently closing
the oven door. The oven rack should move in and out of
the oven freely when the door is opened or closed.
Only the Effortless™ Oven Rack system performs best
when connected and used in oven rack position 2.
If the rack system is assembled with the connector arms,
the Effortless™ Oven rack may be used in oven rack
positions 1, 2, and 3.
To prevent possible damage to the oven, do not attempt
to close the oven door until all the oven racks are fully
positioned back inside the oven cavity.
IMPORTANT
Figure 7:
Remove all oven racks and accessories before starting a
self-clean cycle. If the oven racks are left in the oven
during the self-clean cycle, the gliding ability of the Effort-
less™ Oven Rack system will be damaged, and oven
racks will lose their shiny finish and may turn blue.
Remove all oven racks and clean according to instruc-
tions provided in the Care & Cleaning section of this
manual. Make sure the oven and oven racks are
completely cool when trying to assemble or disassemble
the Effortless™ Oven Rack system.
Door
connector
bracket
Rack
connector
bracket
Oven rack
Connector arm
Connector arm
Open oven door
Connector arm
Connector arm
Left and right
door connector
brackets with
connector arm ends
shown in locked position
(pointing upwards)
Figure 1
Figure 2
Figure 3 - Assembly of the Effortless oven rack
TM
Figure 4
Figure 5
Figure 6 - oven rack after assembly Effortless™
Door
connector
bracket
Rack
connector
bracket
Oven rack
Connector arm
Connector arm
Open oven door
Connector arm
Connector arm
Left and right
door connector
brackets with
connector arm ends
shown in locked position
(pointing upwards)
Figure 1
Figure 2
Figure 3 - Assembly of the Effortless oven rack
TM
Figure 4
Figure 5
Figure 6 - oven rack after assembly Effortless™
CAUTION
Loading ...
Loading ...
Loading ...