Loading ...
Loading ...
Loading ...
MAINTENANCE
Cleaning the Water Inlet Filters
If the washer does not fill properly, an error messagewill
show on the display. The inlet valve filter screenscould
be plugged by hard water scale, sediment in the water
supply, or other debris.
NOTE: The inlet screens protect the delicate parts of the
inlet valve from being damaged by particles that could
enter the valves with the water supply. Operating the
washer with these filters removed could cause a valve to
fail to open, resulting in flooding and/'or property damage.
Inlet Filter
OTurn OFF both water faucets completely. Unscrew the
hot and cold water linesfrom the back of the washer.
Carefully remove the filters from the water valves
and soak them in white vinegar or a lime scale
remover, following the manufacturer's instructions.Be
careful not to damage the filters while cleaning.
Rinse before Pressthe filters
thoroughly reinstalling,
back into place.
Before the flush the hoses and
reattaching hoses,
water lines by running several gallons of -water
through the hoses and into a bucket or drain.
26
Loading ...
Loading ...
Loading ...