Loading ...
Loading ...
Loading ...
VQT5F44
18
Slave Mode
The flash can be fired remotely in sync with any flash fired by other units.
1 Set the flash mode to [SL AUTO] or [SL
MANUAL].
“Flash Mode” (P10)
Adjust other flash settings as for [AUTO] or [MANUAL] mode.
“Camera without Communication Functions” (P17)
2 Position the flash.
Flash positioning method is same as the wireless mode.
“Placing Wireless Flash Units” (P13)
Refer to the camera operating instructions for details about
the flash positioning range.
• Set the flash mode of the camera to the manual which
does not fire the pre-flash. If the camera fires the pre-
flash, the external flash synchronizes with the pre-flash of
the camera, and cannot fire the flash light properly.
• The flash may fire in response to flash units used by other
photographers.
Cautions for Use
∫ About the unit
Do not carry the unit when it is still attached to the camera body.
∫ About the batteries
Be sure to remove the batteries when you will not be using the unit for a long
period of time.
Table of Guide Numbers (GN)
∫ [MANUAL]
Flash
intensity
Lighting angle (mm)
7
¢1, 2
10
¢1, 2
12
¢1, 2
14
¢1, 2
12
¢2
14
¢2
17
¢2
1/1 20 22 25 26 30 33 38
1/2
14 16 18 18 21 23 27
1/4
10 11 13 13 15 17 19
1/8 7.1 7.8 8.8 9.2 11 12 13
1/16
5.0 5.5 6.3 6.5 7.5 8.3 9.5
1/32
3.5 3.9 4.4 4.6 5.3 5.8 6.7
1/64 2.5 2.8 3.1 3.3 3.8 4.1 4.8
1/128
1.8 1.9 2.2 2.3 2.7 2.9 3.4
VQT5F44_ENG.fm 18 ページ 2014年2月17日 月曜日 午後2時22分
Loading ...
Loading ...
Loading ...