Loading ...
Loading ...
Loading ...
49-85223-2
Problem Possible Cause What To Do
Oven light does not
ZRUN
Light bulb is loose or defective. Tighten or replace bulb. See the Maintenance section for
instructions on how to replace the bulb.
2YHQZLOOQRWVHOIFOHDQ The temperature is too high to set
a self-clean operation.
Allow the oven to cool and reset the controls.
Oven controls improperly set. See the Cleaning the Oven section.
([FHVVLYHVPRNLQJ
during clean cycle
([FHVVLYHVRLORUJUHDVH 3UHVVWKH &DQFHO2II pad. Open the windows to rid the
URRPRIVPRNH:DLWXQWLOWKHLOCKED light goes off.
:LSHXSWKHH[FHVVVRLODQGUHVHWWKHFOHDQF\FOH
Oven not clean after a
clean cycle
Oven controls improperly set. See the Cleaning the Oven section.
2YHQZDVKHDYLO\VRLOHG Clean up heavy spillovers before starting the clean cycle.
+HDYLO\VRLOHGRYHQVPD\QHHGWRVHOIFOHDQDJDLQRUIRU
a longer period of time.
Strong “burning” or
“oily” odor emitting
from the vent
7KLVLVQRUPDOLQDQHZRYHQDQG
ZLOOGLVDSSHDULQWLPH
To speed the process, set a self-clean cycle for a
minimum of 3 hours. See the Cleaning the Oven section.
This is temporary.
([FHVVLYHVPRNLQJ
during broiling
Food too close to burner element. Lower the rack position of the food.
2YHQGRRUZLOOQRWRSHQ
or LOCKED light is on
ZKHQ\RXZDQWWRFRRN
The oven door is locked because
the temperature inside the oven
KDVQRWGURSSHGEHORZWKHORFNLQJ
temperature.
3UHVVWKH&DQFHO2II pad. Allow the oven to cool below
the locking temperature.
"LOCK DOOR" flashes
in the display
The self-clean cycle has been
selected but the door is not closed.
Close the oven door.
“F— and a number
or letter” flash in the
display
You have a function error code. 3UHVVWKH&DQFHO2II pad. Allow the oven to cool for one
KRXU3XWWKHRYHQEDFNLQWRRSHUDWLRQ,IWKHIXQFWLRQFRGH
UHSHDWVGLVFRQQHFWDOOSRZHUWRWKHRYHQIRUDWOHDVW
seconds and then reconnect power. If the function error code
repeats again, call for service.
3RZHURXWDJHFORFN
flashes
3RZHURXWDJHRUVXUJH 5HVHWWKHFORFN,IWKHRYHQZDVLQXVH\RXPXVWUHVHW
it by pressing the &DQFHO2II pad, setting the clock and
resetting any cooking function.
Lock Controls or
Control Lockout feature
is activated
If LOC ON appears in the display, the range control is
locked. Turn this feature off to use the range. See the
Lock Control feature in the Oven Controls section.
Burners do not light Plug on range is not completely
inserted in the electrical outlet.
Make sure electrical plug is plugged into a live, properly
grounded outlet.
Gas supply not connected or
turned on.
See the Installation Instructions that came with your
range.
$IXVHLQ\RXUKRPHPD\EHEORZQ
or the circuit breaker tripped.
5HSODFHWKHIXVHRUUHVHWWKHFLUFXLWEUHDNHU
Burner parts not replaced correctly. See the Care and Cleaning of the range section.
%XUQHUVORWVQHDUWKHHOHFWURGHRU
the round lighter port on the oval
EXUQHUPD\EHFORJJHG
5HPRYHWKHEXUQHUVDQGFOHDQWKHP&KHFNWKH
electrode area for burned-on food or grease. See the
Care and Cleaning of the range section.
Food residue on electrode Lightly polish flat tip of electrode with nail file or
sandpaper until shiny.
Troubleshooting tips ... Before you call for service
TROUBLESHOOTING TIPS
Loading ...
Loading ...
Loading ...