Loading ...
Loading ...
Loading ...
49-85223-2 25
CARE AND CLEANING: Cleaning The Cooktop
Cleaning the Cooktop (Cont.)
Burner cap is
properly seated.
Burner cap is
NOT properly
seated.
Burner cap is
NOT properly
seated.
Cleaning the Surface Burners (Cont.)
Cleaning the Burner Caps
:DVKEXUQHUFDSVLQKRWVRDS\ZDWHUDQGULQVHZLWK
FOHDQZDWHU<RXPD\VFRXUZLWKDSODVWLFVFRXULQJSDG
to remove burned-on food particles. The round burner
caps may also be cleaned in your dishwasher.
Cleaning the Burner Heads
:DVKWKHEXUQHUKHDGVURXWLQHO\HVSHFLDOO\DIWHUEDG
spillovers which could clog the burner openings. Lift
EXUQHUVRIIZKHQFRRO:DVKZLWKKRWVRDS\ZDWHU5LQVH
with clean water. For more stubborn stains, use a brush
with plastic bristles.
NOTE: Do not use steel wool or scouring pads to clean
the burner parts as these may clog the openings. Never
wash burner heads in your dishwasher as dishwasher.
Doing so may cause them to discolor.
The ports in the burner heads must be kept clean at all
times for an even, unhampered flame.
Clogged or dirty burner ports or electrodes will not allow
the burner to operate properly.
For proper ignition, make sure the small hole in the notch
that fits over the electrode is kept open. A sewing needle
or wire twist-tie works well to unclog it.
Replacing Surface Burners
Before replacingWKHEXUQHUFDSVKHDGVDQGRYDOKHDG
cap assembly, shake out excess water and allow them to
dry thoroughly.
5HSODFHEXUQHUKHDGVLQWKHFRUUHFWORFDWLRQVDFFRUGLQJ
to size. Ensure each cap is properly seated on the
burner head, as pictured below.
CAUTION
'RQRWRSHUDWHWKHFRRNWRSZLWKRXW
all burner parts and grates in place.
Any spill on or around an electrode must be carefully
cleaned. Avoid hitting the electrode with anything hard or
it could be damaged.
The electrode of the spark igniter is exposed
ZKHQWKHEXUQHUKHDGLVUHPRYHG:KHQRQH
burner is turned to LITE, all the burners spark.
Do not attempt to disassemble or clean around
any burner while another burner is on.
5RXQGKROHLQ
burner head must
be kept clear
Electrode
Loading ...
Loading ...
Loading ...