Loading ...
Loading ...
Loading ...
1 . Auto Scale Removal Function
repeatedly, when " CLE " indicator lighten t means to enter Scale
t time " 20:00 " lighten, tank icon show the currentR emoval function. “Min” and defaul
, i
mode d01, default weight 0.10, corresponding cooking time and " Kg ""Min" light up.
water level ( Water, lack of water, full of water ), other icons disappear.
For best cleaning results, we recommend that you use detergent sodium citrate, which were
randomly for descaling steam microwave oven. Follow the manufacturer's instructions on the
packaging. It is suggested that descaling function should be used after the steam function has
been run for 20 hours.
Note
pro
g
: the desc
a
g
ram must
b
a
ling proces
s
b
e started fr
o
s
shall not
b
o
m s .
b
e shut dow
n
n
. If the des
c
c
aling proc
e
e
ss shut do
w
w
n before the
entire end, the
1) Power up the system, remove the water tank, inject 1000ml of fresh water into the
water tank, adding a pack of descaling agent.
3) In standby mode, press " "button, the display " " lights, screen displays default
4) Press " "
5) Press " " to start the program.
6) Stay whole 1 minute after the program has finished, take out the water tank and pour
the water in the tank. Thoroughly clean the water tank.
) Replace the fresh water, repeat steps 3 to 6.
tep 3
7
7
Defect codes
Below defect codes may occur during steam functions :
E-06: 1-Water tank is not close well.
E-05: water system abnormal, need to contact for Engineer to check, below is the
possibilities.
1-The water sensor is abnormal.
3-The water pump is abnormal.
2-The water pipe is abnormal.
4-The water tank is abnormal.
2) Push the water tank into the appropriate location of the appliance.
22
Loading ...
Loading ...
Loading ...