Loading ...
Loading ...
Loading ...
Health and Safety Information 3
Maintaining Water and Dust Resistance
This device is rated IP67 using the Ingress Protection
rating system.
Your device has been tested in a controlled environment
and shown to be water and dust resistant in certain
circumstances (meets requirements of classification IP67
as described by the international standard IEC 60529 -
Degrees of Protection provided by Enclosures [IP Code];
test conditions: 15-35°C, 86-106 kPa, 1.0 meters, for
30 minutes). Despite this classification, your device is not
impervious to water damage in any situation. It is
important that all compartments are closed tightly.
Note:
If any liquid is found to have entered your device
components or an internally sealed system, this
condition will void your device warranty.
Follow these tips carefully to prevent damage to the
device.
•
Any device which uses accessible compartments or
ports that can be opened should have these sealed or
closed tightly to prevent liquid from entering the
system.
•
Whenever your device gets wet, dry it thoroughly with a
clean, soft cloth.
•
Do not expose the device to salt water or ionized water, or
to water over 1.0 meters deep for more than 30 minutes. If
your device is exposed to fresh water, dry it thoroughly
with a clean, soft cloth. If the device is exposed to any
liquid other than fresh water, rinse the device with fresh
water immediately and dry it thoroughly with a clean, soft
cloth. Failure to rinse the device in fresh water and dry it as
instructed may cause the device to suffer from operability
or cosmetic issues.
•
Do not expose the device to water at high pressure.
Loading ...
Loading ...
Loading ...