Loading ...
Loading ...
Loading ...
46
Stacking kit installation
This stacking kit includes:
• Two (2) side rails
• One (1) front rail
• Four (4) screws
Tools Needed for Installation:
• Phillips screwdriver
To ensure safe and secure installation, please observe
the following instructions.
w
WARNING
•
•
There is a risk of
serious back injury or other injuries.
•
home. Failure to follow this warning can result in
serious injury.
•
Failure to follow this warning can result in
serious injury.
• Failure
to follow this warning can result in serious injury.
•
Failure to do so can result in
electrical shock, fire, explosion, or death.
1. Make sure the surface of the washer is clean and dry.
Remove paper backing from the tape on one of the
stacking kit side brackets.
2. Fit the side bracket to the side of the washer top
as shown in the above illustration. Firmly press the
adhesive area of the bracket to the washer surface.
Secure the side bracket to the washer with a screw on
the back side of the bracket. Repeat steps 1 and 2 to
attach the other side bracket.
OPTIONAL ACCESSORIES
OPTIONAL ACCESSORIES
Loading ...
Loading ...
Loading ...