Loading ...
Loading ...
Loading ...
uuWhen DrivinguShifting
550
Driving
■ If you want to keep the transmission in
(N position [car wash mode]
With the engine running:
1. Press and hold the brake pedal.
2. Select
(N, then release the button to display (Neutral) (N hold mode on the driver
information interface.
3. Press and hold
(N again for two seconds.
u This puts the vehicle in car wash mode which must be used when your vehicle
is pulled through a conveyor type automatic car wash where you or an
attendant do not remain in the vehicle.
If the ENGINE STOP/START button is pressed
after car wash mode has been activated, the
power mode will change to ACCESSORY and
a message will be displayed on the driver
information interface.
u For 15 minutes the gear position remains
in
(N with the power mode in
ACCESSORY. After that, the position
automatically changes to
(P and the
power mode changes to OFF.
u Manually changing to (P cancels
ACCESSORY mode. The
(P indicator
comes on and the power mode changes
to OFF. You must always shift to (P
when car wash mode is no longer
needed.
1If you want to keep the transmission in
(N position [car wash
mode]
NOTICE
When transmission is too hot, carwash mode may
not be available. Let the engine idle and cool down
transmission.
The transmission may not stay in
(N position while
the following indicator is on:
•
Transmission system indicator.
•
Malfunction indicator lamp.
•
Charging system indicator.
ELITE and TOURING grade models
19 ODYSSEY-31THR6120.book 550 ページ ２０１８年１２月６日 木曜日 午後４時３５分
Loading ...
Loading ...
Loading ...