Loading ...
Loading ...
Loading ...
112
uuIndicatorsuDriver Information Interface Warning and Information Messages
Instrument Panel
Message Condition Explanation
• Appears when you pull the electric parking brake
switch without depressing the brake pedal.
• Depress the brake pedal to release the parking brake.
2 Parking Brake P. 602
• Appears as soon as a problem is detected in the
smart entry system.
• Appears constantly - Have your vehicle checked by a
dealer.
• Appears as soon as a problem is detected in the push
button starting system.
• Appears constantly - Have your vehicle checked by a
dealer.
• Appears if there is a problem with the Auto high-
beam.
• Manually operate the headlight switch.
• If you are driving with the high-beam headlights when
this happens, the headlights are changed to low beams.
• Appears when the Auto high-beam is in operation,
or the headlight switch is turned in AUTO, but the
temperature inside the camera is too high. The Auto
high-beam cancels automatically.
• Use the climate control system to cool down the
camera.
• Goes off - The camera has been cooled down. Turning
the headlight switch to AUTO can resume the system.
2 Front Sensor Camera
*
P. 564
• Appears when the area around the camera is
blocked by dirt, mud, etc. Stop your vehicle in a safe
place, and wipe it off with a soft cloth.
• May appear when driving in bad weather (rain,
snow, fog, etc.)
• Have your vehicle checked by a dealer if the message
comes back on after you cleaned the area around the
camera.
Models with smart entry system
Models with Auto high-beam
Models with Auto high-beam
Models with Auto high-beam
* Not available on all models
19 ODYSSEY-31THR6120.book 112 ページ ２０１８年１２月６日 木曜日 午後４時３５分
Loading ...
Loading ...
Loading ...