Loading ...
Loading ...
Loading ...
Installation
145
EN
Access to the terminal board (pyrolytic
models only)
To connect the power supply cable, you
must access the terminal board on the rear
casing:
1. Remove the screws fastening the plate to
the rear casing.
2. Gently rotate the plate and remove it
from its seat.
3. Proceed with installation of the power
supply cable.
4. When you have finished, reposition the
plate on the rear casing and fasten it in
place with the previously removed
screws.
It is recommended to slacken off
the cable clamp screw before
installing the power supply cable.
Loading ...