Loading ...
Loading ...
Loading ...
- 16 -
3. Tuck the bag into
the dust bag
chamber. Be sure all
sides of the dust
bag are completely
within bag cavity
prior to closing the
bag cover.
4. Place the tab on
the dust bag cover in the slot on the
vacuum cleaner.
5. Press the dust
bag cover into
place. You will
hear a distinct
snap when cover is
securely closed.
Check to see that the dust bag is fully
placed in the bag chamber.
NOTE: If bag is not installed or not
installed properly the bag safety stop
prevents the door from closing.
Slot
Tab
Ke
nmo
r
e
CAUTION
NEVER REUSE A DUST BAG. Very fine
materials, such as carpet freshener, face
powder, fine dust, plaster, soot, etc. can
clog the bag and cause it to burst before
it is full. Change bag more often when
vacuuming these materials.
CHANGING DUST BAG
WARNING
Always unplug power cord from electrical
outlet before performing maintenance to
the vacuum cleaner.
DUST BAG STYLE O
TO REMOVE DUST BAG
1. Pull on the
dust bag cover
latch to remove
dust bag cover.
NOTE: Do not
pull on the dust
bag.
Kenm
ore
Dust Bag
Cover
Latch
TO REPLACE DUST BAG
1. Fold the
safety seal tab
on the new
dust bag away
from the
opening that
fits on the dust
bag holder.
2. Push dust bag
collar opening
completely over the
dust bag holder as
far as it will go.
Dust
Bag
Safety
Seal Tab
2. Grasp the dust
bag collar by both
sides, (not the tab,)
and pull gently,
carefully removing
the dust bag from
the dust bag holder.
3. Dispose the used dust bag carefully into
a plastic bag and tie or seal it to prevent
dust escape. Do not reuse dust bag.
NOTE: Check
the dust bag
holder and
the motor
safety filter
for dirt or
clogs.
Dust Bag
Holder
Bag Saftey
Stop
Motor
Safety
Filter
Loading ...
Loading ...
Loading ...