Loading ...
Loading ...
Loading ...
DSC Dynamic Stability Control, refer to
page 135.
DSC Dynamic Stability Control deactivated
DSC Dynamic Stability Control is deac‐
tivated.
DSC Dynamic Stability Control, refer to
page 135.
M Dynamic Mode MDM
M Dynamic Mode MDM is switched on.
M Dynamic Mode, refer to page 136.
Indicator light also flashes: MDM con‐
trols the drive and braking forces. The
vehicle is stabilized.
The indicator light illuminates: MDM
has malfunctioned. Have the system
checked by a dealer’s service center or
another qualified service center or re‐
pair shop.
M Dynamic Mode, refer to page 136.
Flat Tire Monitor FTM
The Flat Tire Monitor signals a loss of
tire inflation pressure in a tire.
Reduce your speed and stop cau‐
tiously. Avoid sudden braking and steering ma‐
neuvers.
Flat Tire Monitor, refer to page 124.
Tire Pressure Monitor TPM
The indicator light illuminates.
The Tire Pressure Monitor reports a
low tire inflation pressure or a flat tire.
Follow the information in the Check Control
message.
The indicator light flashes and then illuminates
continuously.
No flat tire or loss of tire inflation pressure can
be detected.
▷ Interference caused by systems or devices
with the same radio frequency: after leav‐
ing the area of the interference, the system
automatically becomes active again.
▷ TPM was unable to complete the reset.
Reset the system again.
▷ A wheel without TPM wheel electronics is
mounted: have it checked by a dealer’s
service center or another qualified service
center or repair shop as needed.
▷ Malfunction: have the system checked by a
dealer’s service center or another qualified
service center or repair shop.
Tire Pressure Monitor, refer to page 120.
Steering system
Steering system in some cases not
working.
Have the system checked by a dealer’s
service center or another qualified service cen‐
ter or repair shop.
Emissions
▷ The warning light lights up:
Emissions are deteriorating. Have
the vehicle checked as soon as
possible.
▷ The warning light flashes under certain cir‐
cumstances:
This indicates that there is excessive mis‐
firing in the engine.
Reduce the vehicle speed and have the
system checked immediately; otherwise,
serious engine misfiring within a brief pe‐
riod can seriously damage emission con‐
trol components, in particular the catalytic
converter.
Socket for Onboard Diagnosis, refer to
page 211.
Seite 101
Displays Controls
101
Online Edition for Part no. 01402981836 - VI/17
Loading ...
Loading ...
Loading ...