Loading ...
Loading ...
Loading ...
4
Install Levelers
IMPORTANT: Lay down the refrigerator ONLY to your left-hand
side (as you are looking at the front of the refrigerator) to avoid
damaging the refrigerator.
1. Locate the levelers. They are enclosed in a plastic bag inside
the crisper drawer.
2. Using two or more people, access the bottom of the
refrigerator either by tilting it rst to one side and then the
other or by laying it down on the oor to your left-hand side
as shown.
■ Tilt the refrigerator to the side enough to access the
bottom. Using a 3/8" hex driver, remove the two screws
attaching the wooden runner to the bottom of the
refrigerator. Then install a leveler to the front corner.
Repeat for the opposite side.
NOTE: The refrigerator cabinet should not touch the floor
without a leveler installed.
OR
■ Using the packaging corner posts (left-hand side, front and
back) as a cushion, lay the refrigerator down on the floor (to
your left-hand side only) as shown in the following graphic.
NOTE: Using the packaging as a cushion will help to avoid
possible damage to the refrigerator.
■ Using a 3/8" hex driver, remove the two screws attaching
each wooden runner to the bottom of the refrigerator. Install
a leveler to each of the front corners.
Clean Before Using
After you remove all of the package materials, clean the inside of
your refrigerator before using it. See the cleaning instructions in
“Refrigerator Care.”
Location Requirements
IMPORTANT: This refrigerator is designed for indoor, household
use only.
To ensure proper ventilation for your refrigerator, it is
recommended to allow a 1/2" (1.25 cm) space on each side.
Allow 1½" (3.81 cm) of space between overhead cabinets and
refrigerator top. Allow at least 1" (2.54 cm) between back of
cabinet and the wall (consider the condenser as back in case
is present). If your refrigerator has an ice maker, make sure you
leave extra space at the back for the water line connections.
If you are installing your refrigerator next to a fixed wall, leave
enough space on the hinge side to allow the door to swing open.
BA
A. Remove runner.
B. Install leveler.
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
BA
C
A. Remove runner.
B. Install leveler.
C. Packaging corner post.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
Loading ...
Loading ...
Loading ...