Loading ...
Loading ...
Loading ...
10
Using the Controls panel
Temperature Control
Temperature Control For your
convenience, the temperature
control is preset at the factory.
When you first install your
refrigerator, make sure the control is still preset as shown
NOTE: Neither compartment will cool when the control is set to
OFF.
Adjusting the Temperature Control
If you need to adjust the temperature on either the refrigerator or
freezer compartment, use the settings listed in the chart below
as a guide.
NOTE: Except when starting the refrigerator, do not adjust the
control more than one setting at a time. Wait 24 hours between
adjustments for the temperature to stabilize.
■ Press the Temp button to toggle among the third LED lights
which indicate the temperature setting. Reading from left to
right, the LED in the first position is the least cold. The LEDs
indicate increasingly colder settings as you continue to the
right until all third LEDs are illuminated.
CONDITION/REASON: ADJUSTMENT:
REFRIGERATOR too warm Temperature Control one
setting higher
REFRIGERATOR too warm/
too little ice
Temperature Control one
setting higher
REFRIGERATOR too cold Temperature Control one
setting lower
FREEZER too cold Temperature Control one
setting lower
Airflow Control
The Airflow control is located on the back
wall of the freezer. It regulates the amount
of air flowing between the freezer and the
refrigerator compartments.
When you plug in the refrigerator for the first
time, turn the Airflow control to the
Recommended setting.
Adjust the Airflow Control
If you want to temporarily increase the cold airflow to a specific
compartment, adjust the control.
IMPORTANT: Once the performance is achieved, return the
Airflow control to the Recommended setting to keep the
refrigerator operating at optimum efficiency.
CONDITION/REASON: ADJUSTMENT:
Heavy ice use Max
Hot room temperature Max - To maintain ice
making production rate
Large quantity of groceries Min - To quickly chill food
and beverages
Crisper Humidity Control (on some models)
You control the amount of humidity in the moisture-sealed
crisper. Depending on the produce you are storing, select the
desired Humidity Level.
Humidity Level - Min Setting
MIN (open) lets moist air out of the crisper for best storage of
fruits and vegetables with skins.
■ Fruit: Wash, let dry and store in refrigerator in plastic bag
or crisper. Do not wash or cut berries until they are ready to
use. Sort and keep berries in original container in crisper, or
store in a loosely closed paper bag on a refrigerator shelf.
■ Vegetables with skins: Place in plastic bag or plastic
container and store in crisper.
Humidity Level - Max Setting
MAX (closed) keeps moist air in the crisper for best storage of
fresh, leafy vegetables.
■ Leafy vegetables: Wash in cold water, drain and trim or tear
off bruised and discolored areas. Place in plastic bag or
plastic container and store in crisper.
OPERATING YOUR REFRIGERATOR
FAST COOL
3 sec
3 sec
Recommended Setting
Loading ...
Loading ...
Loading ...