Loading ...
Loading ...
Loading ...
04_ Safety information
flames or potential sources
of ignition and air the room
in which the appliance is
standing for several minutes.
- In order to avoid the creation
of a flammable gas-air mixture
if a leak in the refrigerating
circuit occurs, the size of the
room in which the appliance
may be sited depends on the
amount of refrigerant used.
- Never start up an appliance
showing any signs of damage.
If in doubt, consult your
dealer. The room where the
refrigerator will be sited must
be 1m³ in size for every 8g
of R-600a refrigerant inside
the appliance. The amount of
refrigerant in your particular
appliance is shown on the
identification plate inside the
appliance.
- If the appliance contains
isobutane refrigerant
(R-600a), a natural gas
with high environmental
compatibility that is, however,
also combustible. When
transporting and installing the
appliance, care should be
taken to ensure that no parts
of the refrigerating circuit are
damaged.
SEVERE WARNING
SIGNS FOR
INSTALLATION
• Do not install this
appliance in a humid, oily
or dusty location, in a
location exposed to direct
sunlight and water (rain
drops).
- Deteriorated insulation of
electrical parts may cause an
electric shock or fire.
• Do not place this refrigerator
in direct sunlight or expose to
the heat from stoves, room
heaters or other appliances.
• Do not plug several appliances
into the same multiple power
board.
The refrigerator should always
be plugged into its own
individual electrical outlet
which has a voltage rating that
matched the rating plate.
- This provides the best
performance and also
prevents overloading house
wiring circuits, which could
cause a fire hazard from
overheated wires. If the wall
socket is loose, do not insert
the power plug.
- There is a risk of electric shock
or fire.
• Do not use a cord that shows
WARNING
DA68-02916A (EN)-12.indd 4 2016. 3. 24. �� 7:18
Loading ...
Loading ...
Loading ...