Loading ...
Loading ...
Loading ...
operating _25
02 OPERATING
To save electricity, the Panel Display turns off
automatically under the following conditions:
When no button has been pressed, when
no doors are open, or when no Dispenser
Lever has been pushed. However, the icon
indicating your cubed or crushed ice selection,
or sparkling water selection, will stay on.
When you press a button, open a door, or
push a Dispenser Lever, the Panel Display will
turn on again. All function keys will become
operational after you remove your finger from
the button you pressed.
( 10 )
Filter
Water filter usage
This icon lights up when you need
to change the filter, usually after the
refrigerator has dispensed about 300
gallons of water (after about 6 months).
The icon will blink red for several seconds
when you open or close the door.
After you install the new water filter, reset
the filter indicator by touching and holding
the Hold 3sec for Filter Reset button for
3 seconds.
- If water is not dispensing or
dispensing slowly, you need to
replace the water filter because
the water filter is clogged.
- Some areas have large amounts
of lime in their water, which
causes the water filter to clog
more quickly.
CHANGING THE WATER
FILTER
To reduce the risk of water damage
to your property DO NOT use generic
brands of water filters in your SAMSUNG
Refrigerator.
USE ONLY SAMSUNG BRAND
WATER FILTERS. SAMSUNG is not
legally responsible for any damage,
including, but not limited to, property
damage caused by water leakage
from the use of a generic water filter.
SAMSUNG Refrigerators are designed to work
ONLY WITH SAMSUNG Water Filters.
The Filter light turns red to let you know when it is
time to change your water filter cartridge.
To give you time to get a new filter, the red light
comes on just before the capacity of the current
filter runs out. Changing the filter on time provides
you with the freshest, cleanest water from your
refrigerator.
WARNING
To change the water filter, follow these steps:
1. Shut off the water supply. Then, turn the water
filter (1) about 1/4 turn, counter-clockwise.
2
1
2. Pull the water filter (1) from the case filter (2).
• To change the water filter more easily,
shut off the water supply valve.
• Sometimes, it is hard to disassemble the water
filter because impurities in the water cause it
to stick. If you are having difficulties, grip the
water filter firmly and pull it hard.
• When you pull the water filter, a little water
can leak from the opening. This is normal.
To minimize the water leaks, keep the filter
cartridge horizontal when you pull it.
• To prevent overflow,
empty the water
filter tray (3) and
dry around the filter
case (2).
3. Insert the new filter into the filter case (4).
4. Push the filter, and then turn it clockwise until
it locks.
• If you have trouble inserting the water
filter because of high water pressure,
shut off the water supply valve.
• The locked symbol should be lined up
with the indicator line.
4
5. Touch the “Alarm/hold
3 sec for Filter Reset”
button (
(Filter Reset)
) for
about 3 seconds to reset
the water filter. The color of
the indicator ( ) changes from red to off.
6. If you turned off the water supply, turn it back
on.
(Red)
3
2
DA68-02916A (EN)-12.indd 25 2016. 3. 24. �� 7:18
Loading ...
Loading ...
Loading ...