Loading ...
Loading ...
Loading ...
(397,1)
北米Model "A3210BE-C" EDITED: 2019/ 11/ 28
4. Insert the hitch pin into the hole located
on the hitch receiver tube so that the pin
passes through the ball mount.
5. Insert the safety clip to the groove on
the hitch pin securely.
6. Check the ball mount assembly by
pulling on it to make sure it does not come
off the hitch receiver.
1) Hitch ball installation point
2) Hooks for safety chains
7. Attach a hitch ball. Use only a hitch ball
that is appropriate for the ball mount and
your trailer. The hitch ball must be securely
installed on the ball mount.
8. Connect your trailer to the hitch ball.
9. Connect the trailer and the hitch with
safety chains that will hold the trailer’s
maximum gross weight. The chains should
cross under the trailer tongue to prevent
the tongue from dropping onto the ground
in case it should disconnect from the hitch
ball. Allow sufficient slack in the chains
taking tight turn situations into account;
however, be careful not to let them drag on
the ground.
WARNING
Do not connect safety chains to any
part of the vehicle other than the
safety chain hooks.
Hitch harness connector (7-pin type)
Hitch harness connector (4-pin type)
10. Connect the hitch wire harness’s black
4-pin or 7-pin wire connector to the towing
trailer’s wire harness.
11. Confirm proper function of the hitch
wire harness by individually activating the
brake, stop and turn signal lights on the
trailer.
NOTE
Always disconnect the trailer wire har-
ness before launching or retrieving a
watercraft.
– CONTINUED –
Trailer hitch (dealer option)
395
8
Driving tips
Loading ...
Loading ...
Loading ...