Loading ...
Loading ...
Loading ...
(272,1)
北米Model "A3210BE-C" EDITED: 2019/ 11/ 28
& Climate control display
S04AG10
! Front climate control panel
S04AG1001
1) Set temperature indicator (driver’s side)
2) FULL AUTO indicator
3) AUTO indicator
4) Airflow mode indicator
5) Fan speed indicator
6) Set temperature indicator (rear)
7) Maximum air conditioner ON indicator
8) Set temperature indicator (front passen-
ger’s side)
9) SYNC indicator (front)
10) Rear climate control lock indicator
11) Rear climate control ON/OFF indicator
12) SYNC indicator (rear)
13) Rear climate control display indicator
! Rear climate control panel
S04AG1002
1) Set temperature indicator
2) Airflow mode indicator
3) Fan speed indicator
4) AUTO indicator
5) FULL AUTO indicator
6) Rear climate control lock indicator
7) SYNC indicator
4-3. Automatic climate con-
trol operation
S04AI
When this mode is selected, the fan speed,
airflow distribution, air-inlet control, and air
conditioner compressor operation are
automatically controlled. To activate this
mode, perform the following.
1. Press the AUTO button. The indicator
light “FULL AUTO” on the climate control
display illuminates.
2. Set the preferred temperature using
the temperature control dial.
NOTE
. Operate the automatic climate con-
trol system when the engine is running.
. Even when cooling is not necessary,
the air conditioner compressor will
automatically turn on if the temperature
is set much lower than the current
outlet air temperature. Even in this
case, the “A/C” indicator light on the
control panel illuminates.
. The controllable temperature range
may vary depending on the regional
specifications of the vehicle.
. If you operate any of the buttons on
the control panel other than the ON/
OFF button, rear window defogger
button, SYNC button and temperature
control dial(s) during FULL AUTO mode
Automatic climate control operation
270
Loading ...
Loading ...
Loading ...