Loading ...
Loading ...
Loading ...
(249,1)
北米Model "A3210BE-C" EDITED: 2019/ 11/ 28
. When using the display mode, parts
of the vehicle interior may reflect light
on the display. Adjust the angle of the
Smart Rearview Mirror to avoid un-
wanted reflection.
! Display adjustment
S03AP110307
1) Left button
2) Center button
3) Right button
Press any of the left, center or right buttons
to display the main menu. Select “DIS-
PLAY” using the center button and press
the left button.
NOTE
The main menu cannot be displayed on
the display while the select lever is in a
position other than the “P” position.
Brightness adjustment
1) Setting button: Press the setting button to
set the brightness.
2) Press this button to decrease the bright-
ness.
3) Press this button to increase the bright-
ness.
After pressing the setting button, the mode
will change to the up/down adjustment
mode.
To leave the brightness adjustment menu,
press the HomeLink button.
NOTE
If the button is not touched for 5
seconds, the brightness adjustment
menu will exit.
Up/down adjustment
1) Setting button: Press the setting button to
set the angle.
2) Press this button to lower the angle.
3) Press this button to raise the angle.
After pressing the setting button, the mode
will change to the left/right adjustment
mode.
To leave the up/down adjustment menu,
press the HomeLink button.
NOTE
If the button is not touched for 5
seconds, the up/down adjustment
menu will exit.
– CONTINUED –
Mirrors
247
3
Instruments and controls
Loading ...
Loading ...
Loading ...