Loading ...
Loading ...
Loading ...
7
Installing the Oven Racks
WARNING
The oven racks become hot when the oven is in use.
The rack supports provide seven heights for posi-
tioning of the oven racks.
Standard Oven Rack
To install a standard oven rack:
1. Insert the end of the rack with the safety notches
into the oven first.
2. Attach both sides of the rack to the rack supports
in the oven as shown below.
3. Begin to slide the rack in, and then, lift up so
that the safety notches clear the ends of the rack
supports.
4. Push the rack all the way in with both hands.
To remove a standard oven rack:
1. Grasp it with both hands and pull gently straight
out toward you until it stops.
2. To remove the rack completely, lift the front of
the rack up about six inches and continue to
pull it out. Lifting the rack releases the safety
notches. The safety notches reduce the chances
of a rack coming out of the oven accidentally.
GlideRack™ Oven Racks
Your oven comes with Dacor GlideRack oven racks.
When you use them, you can effortlessly slide heavy
pots, pans or other items out to check, stir or add
ingredients quickly and safely.
To insert a GlideRack oven rack:
1. Extend the rack guides completely as shown below.
2. Align both sets of safety clips (right and left) on the
back of the rack guides with the oven rack supports
as shown.
3. Insert the rack into the oven, sliding the rack sup-
ports between the rear safety clips as shown. As
you slide the rack in, hold the front of the rack up
slightly until the front safety clips just clear the
front of the rack supports.
4. Lower the front of the rack so that the front of the
rack support is between the front safety clip and the
rack stop.
5. Grasp the rack in the center of the front and pull.
The rack should come forward while the guides
remain in place.
To remove a GlideRack oven rack:
• Grasp the rack with both hands and pull it gently
straight out toward you until it stops.
• Lift up until the front safety clips just clear the
front of the oven rack supports. Continue to pull
out. Moving the end of the rack slightly, left to
right, as you pull, will make it easier to remove.
Setting Up the Range
Standard Oven Rack Installation
Front of rack
Front of
rack
Rack guides
(fully extended)
Lift front safety
clips over rack
supports
Slide rack supports
between back safety clips
Rack support
(inside oven)
Back of
guide
Back of rack
Rack
support
Slide oven rack
supports into
slots on the rack
Safety notch
GlideRack Oven Rack Installation
Loading ...
Loading ...
Loading ...