Loading ...
Loading ...
Loading ...
2.
●
1.
●
●
Clean and Maintenance
10
GDN45BA-A3EBA2A、GDN45BA-A3EBA3A、GDN45BA-A3EBA4A
Water Bucket
Every few weeks, clean the bucket to prevent growth of mold, mildew and
bacteria. Use soft brush to clean the bucket and then rinse it.
To remove:
(1) Direct the rotor shaft of handle to the hole of buckle plate.Pull the bucket
plate at the handle side by following the arrow direction. Remove the handle.
(shown in Fig.1a,Fig.1b,Fig.1c)
(2) Press down all buckles around the water bucket. Lift up the drain lid.
(shown in Fig.2a,Fig.2b,Fig.2c)
Note:5 clasps marked with line on the right figure.
Warning
Before cleaning, turn off the dehumidifier and disconnect power. Otherwise it
may lead to electric shock.
Do not wash the dehumidifier with water, or it may lead to electric shock.
Do not use volatile liquid(such as thinner or gasoline) to clean
dehumidifier.Otherwise it will damage unit's appearance.
Grille and Case
To clean the case:
When there is dust on the case, use soft towel
to dust it off; When the case is very dirty(greasy),
use mild detergent to clean it.
To clean the grille:Use a dust catcher or brush.
Buckle Plate
Hole of Buckle Plate
Handle
Drain Lid
Rotor Shaft
Fig. 1a
of Handle
Buckle
Fig. 2a
Note:Actual product may be different from above graphics, please refer to actual product.
Loading ...
Loading ...
Loading ...