Loading ...
Loading ...
Loading ...
10
T: 0333 577 7230www.sharphomeappliances.com
2
Pull out the remaining plastic section of each transit bolt by hand. This will require a
reaso
nable amount of force (fig 5c).
3
Insert the blanking caps (4 off): Push the cap into the hole until the four connectors click into
place. Check that the cap is flush with the machine.
To re-fit the transit bolts (4 off) for future transportation:
1
Pull and remove the four plastic blanking caps.
2
Insert the plastic sections of the transit bolts into the exposed holes.
3
Insert the bolts into the plastic sections of the transit bolts and tighten with a suitable
spanne
r until secure.
Figure 5
a:
b:
c:
Loading ...
Loading ...
Loading ...