Loading ...
Loading ...
Loading ...
The function divides the power
between cooking zones.
The function activates when the total
electricity loading of the cooking
zones exceeds 3700 W.
The function decreases the power to
the other cooking zones.
The heat setting display of the
reduced zones changes between two
levels.
6. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
6.1 Cookware
Electric:
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
Use the induction cooking
zones with correct cookware.
Cookware material
correct: cast iron, steel, enamelled
steel, stainless steel, the bottom
made of multi-layer (with correct mark
from a manufacturer).
not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is correct for an induction
hob if:
some water boils very quickly on a
zone set to the highest heat setting.
a magnet pulls on to the bottom of
the cookware.
The bottom of the cookware
must be as thick and flat as
possible.
Cookware dimensions
Induction cooking zones adapt to the
dimension of the bottom of the
cookware automatically to some limit.
The cooking zone efficiency is related to
the diameter of the cookware. The
cookware with a smaller diameter than
the minimum receives only a part of the
power generated by the cooking zone.
Refer to “Technical
information” chapter.
CAUTION!
Do not use cast iron pans,
potstones, earthenware, grill
or toaster plates.
Gas:
WARNING!
Do not put the same pan on
two burners.
WARNING!
Do not put unstable or
damaged pots on the burner
to prevent from spill and
injury.
CAUTION!
Make sure that the bottoms
of pots do not stand above
the control knob, otherwise
the flame heats the control
knob up.
CAUTION!
Make sure that pot handles
are not above the front edge
of the cooktop.
www.aeg.com18
Loading ...
Loading ...
Loading ...