Loading ...
Loading ...
Loading ...
41
FEATURES AND CONTROLS
Passenger Seat (X2)
Seat Conversion
5. Lift the adjustment latch at the top of the passenger backrest. Raise
the backrest to the desired position. Release the latch, making sure
it locks into one of the three operating positions.
Tip: The backrest must be moved out of the lowest position before it can be
secured in the upright position. The lowest position is for seat storage only.
Do not leave the backrest in the lowest position. Always adjust the backrest
to one of the three operating positions.
6. Lower the operator backrest
to create the passenger seat.
Two retaining pins under
the seat should fit into the
two grommets on the seat
base.
7. Test the passenger seat lock-
out by attempting to release
the cargo box dump latch.
See page 81. If the dump
latch releases, the seat is not
secure. Repeat the set-up
procedure. If the lock-out is
not working properly, do not
allow a passenger to ride
the vehicle. See your
POLARIS dealer for service.
8. To return the vehicle to single-rider
operation, reverse all steps. Always
lower the passenger backrest to the
lowest position before folding it down
into the cargo box. Slide the seat latch
levers outward to secure the locks.
Passenger
Seat Base
Backrest
Adjustment
Latch
Locked
Loading ...
Loading ...
Loading ...