Loading ...
Loading ...
Loading ...
13EN
English
Stillmode
You can pause the image shown on the TV screen.
Press FREEZE to pause the image shown on the TV screen.
Freeze
• The sound output will not be paused.
• If no signal is detected or protected signal is received during still
mode, the image remains paused and the sound output will be
muted.
• The still function will be released after 5 minutes.
To cancel still mode, press any button except
.
(standby-On).
Watchingchannelsfromaset-topbox
Towatchchannelsfromaset-topbox
1 Switch on the set-top box.
» The picture from your set-top box might appear automatically
on the TV screen.
2
Use the remote control of your set-top box to select channels.
Ifthepicturedoesnotappear
1 Press SOURCE repeatedly to select the set-top box and wait a
few seconds for the picture to appear.
2 Use the remote control of your set-top box to select channels.
Watchingconnecteddevices
Towatchconnecteddevices
1 Switch on the connected device.
» The picture from your connected device might appear
automatically on the TV screen.
2 Use the remote control of the device to select channels.
Ifthepicturedoesnotappear
1 Press SOURCE repeatedly to select the connected device and wait
a few seconds for the picture to appear.
2 Use the remote control of the device to select channels.
AutomaticPowerShutOff
If there is no input signal and no operation for 15 minutes, the unit will
turn off automatically.
Adjustingvolume
Toincreaseordecreasevolume
• Press VOL+/− on the remote control or press VOLUME+/− on
the side of the TV.
Tomuteorunmutesound
• Press MUTE on the remote control to mute the sound.
• Press MUTE again or VOL+/− to recover the original sound.
Loading ...
Loading ...
Loading ...