Loading ...
Loading ...
Loading ...
7
Operating Your Kambrook Stick Mixer
Before First Use
Remove any packaging material and
promotional labels.
When unpacking the Stick Mixer,
check to see you have received all
the required parts before discarding
the packaging.
Hold the storage case base with
one hand whilst holding the top
of the blending jug with the other
hand; using your thumb slide the lock
mechanism on the storage case base
to the right to release the blending
jug. Lift the blending jug up and
away from the storage case base
to remove.
Lift the blending shaft and motor
body out from the holes inside the
storage case base.
Wash the blending jug with warm
soapy water, rinse and dry thoroughly.
Wash the blending shaft in warm
soapy water. Rinse and dry
thoroughly. Ensure no water remains
inside the blending shaft to avoid
water running into the motor body
when the motor body and blending
shaft are assembled.
NOTE: The detachable
blending shaft and blending
jug are dishwasher safe.
NOTE: Before placing the
blending shaft back onto the
motor body after washing,
make sure that the blending
shaft has been dried
thoroughly.
WARNING: Do not
immerse the motor unit,
cord, or plug in water or
any other liquid.
WARNING: The blending
blade is extremely sharp.
Handle with care and only
lift from the shaft.
To Attach the Stainless Steel
Blending Shaft to Motor Body
Align the “ ” symbol found on the
motor body with the “
ALIGN
” symbol on
the blending shaft then turn the shaft
in an anti-clockwise direction. Make
sure the “
” symbol on the motor
body is aligned with the “
LOCK
” symbol
on the shaft and is locked in place
and secure.
Ensure the shaft is dry and that there is
no water inside before re-attaching to
avoid any water getting in the motor
body.
Loading ...
Loading ...
Loading ...