Loading ...
Loading ...
Loading ...
11
Care, Cleaning and Storage
Cleaning
Before cleaning, turn the power off
at the power outlet and then remove
the power plug from the outlet.
QUICK WASH: Between each
processing task, with the motor body
attached and turned on at the
power outlet, place the stainless steel
blending shaft into a jug of water and
press the ‘ON’ button for 5 seconds.
This will remove any foodstuffs on
the blade and shaft and allows
you to quickly move onto the next
processing task.
Blending Shaft Cleaning
Remove the motor body from the
stainless steel blending shaft.
The stainless steel blending shaft is
dishwasher safe and can also be
hand washed in hot soapy water,
rinsed and dried thoroughly after
each use.
Do not use abrasive cleaners or
steel wool.
Blending Jug
The blending jug is dishwasher safe
and can also be hand washed in
warm soapy water, rinsed and dried
thoroughly after each use.
Motor Body
To remove any food residue, wipe
the motor body and cord with a
damp cloth only. Do not use abrasive
cleaners or steel wool. Never immerse
the motor body in water or any other
liquid.
Storage Case Base
To remove any food residue, wipe the
storage case base with a damp cloth
only. Do not use abrasive cleaners or
steel wool. Never immerse the storage
case base in water or any other liquid.
NOTE: The detachable
blending shaft and blending
jug are dishwasher safe.
Storage
Before storage, turn the power
off at the power outlet and then
remove the power plug from the
outlet. Ensure the Stick Mixer is clean
and completely dry. The stick mixer
conveniently packs-up inside the
storage case and blending jug:
1. Place the storage case base on a
flat, dry surface.
2. Insert the blending shaft into the
hole with the “
” symbol
on the storage case base.
3. Wrap the power cord around the
motor body.
4. With the cord wrapped around,
insert the motor body into the
hole with the “
” symbol
on the storage case base.
Make sure the power plug sits in
between the motor body and
blending shaft (See Fig. 2).
Fig. 2
Loading ...
Loading ...
Loading ...