Loading ...
Loading ...
Loading ...
Deactivating and Activating the Belt-Minder姞 Feature
WARNING: While the design allows you to deactivate your
Belt-Minder威, this system is designed to improve your chances of
being safely belted and surviving an accident. We recommend you leave
the Belt-Minder威 system activated for yourself and others who may use
the vehicle. To reduce the risk of injury, do not deactivate or activate
the Belt-Minder威 feature while driving the vehicle.
Note: The driver and front passenger Belt-Minder威 are deactivated and
activated independently. When deactivating or activating one seating
position, do not buckle the other position as this will terminate the
process.
Note: The driver and front passenger Belt-Minder威 features must be
disabled and enabled separately. Both cannot be disable or enabled
during the same key cycle.
Note: If you are using MyKey威, the Belt-Minder威 cannot be disabled.
Also, if the Belt-Minder威 has been previously disabled, it will be
re-enabled during the use of MyKey威. Refer to the MyKey威 chapter.
Read Steps1-4thoroughly before proceeding with the deactivation
or activation programming procedure.
The driver and front passenger Belt-Minder威 features can be deactivated
or activated by performing the following procedure:
Before following the procedure, make sure that:
• The parking brake is set
• The gearshift is in position P (automatic transmission)
• The gearshift is in neutral (manual transmission)
• The ignition is on
• The driver and front passenger safety belts are unbuckled
1. Turn the ignition on. DO NOT START THE ENGINE.
2. Wait until the safety belt warning light turns off (approximately one
minute).
• Step 3 must be completed within 30 seconds after the safety belt
warning light turns off.
40 Safety Belts
2013 05+ Mustang (197)
Owners Guide gf, 1st Printing
USA (fus)
Loading ...
Loading ...
Loading ...