Loading ...
Loading ...
3
Assembling the Burners
Check your model number. Then refer to the following for information specific to your burners.
Standard and Multi-flame Burners
■ Burner caps and spreaders are included with your cooktop.
■ Always match the burner spreader size to the cap size.
■ Always line up the hole in the spreader to the electrode.
■ The cooktop comes with an extra Melt cap. This is a large cap with
“MELT” and “FOR SMALLEST BURNER” printed on it. Use this cap
over the small burners, position C on KGCS3 series models, and
position A on KCGS5 series and KCGS9 series models.
■ Standard and multi-flame burners are similar in assembly. Note that
there is no hole in the multi-flame burner spreader to insert the
electrode. The multi-flame burner electrode (C) aligns with the
semicircle notch in the spreader (B).
Professional Dual Ring and Even-Heat™ Torch Burners
■ Install the outer and inner caps on the professional dual ring burner.
■ Install the outer spreader, inner spreader, and inner cap on the
Even-Heat™ Torch burner.
IMPORTANT: Align the notches in the inner spreader with the tabs
on the Even-Heat™ Torch burner.
Grate Placement
To install the grates, align the feet on the center grate with the indents
on the cooktop. Then install the 2 outer grates by aligning the tabs on
the center grate with the slots in the outer grates. Be sure to line up the
slots and tabs for proper grate alignment.
ASSEMBLING YOUR COOKTOP
B
C
D
E
A
A
B
C
D
E
D
B
C
A
E
KCGS350ESS and KCGS356ESS
A. Standard burner
B. Dual flame burner
C. Standard burner
(Even-Heat™ simmer)
D. Standard burner
E. Standard burner
KCGS550ESS and KCGS556ESS
A. Standard burner
(Even-Heat™ simmer)
B. Professional dual ring burner
C. Standard burner
D. Standard burner
E. Standard burner
KCGS950ESS and KCGS956ESS
A. Standard burner
(Even-Heat™ simmer)
B. Professional dual ring burner
C. Standard burner
D. Even-Heat™ torch burner
E. Standard burner
Standard Burner
A. Cap
B. Spreader
C. Electrode
Multi-flame (Center) Burner
A. Cap
B. Spreader
C. Electrode
Professional Dual Ring Burner
A. Inner cap
B. Outer cap
A
B
C
A
B
C
A
B
Even-Heat™ Torch Burner
A. Inner cap/spreader
B. Outer spreader
Inner Spreader
A. Inner spreader notch
B. Burner tabs
A. Outer grate slot
B. Center grate tab
A
B
A
B
A
B
Loading ...
Loading ...
Loading ...