Loading ...
Loading ...
Loading ...
12
Cleaning the metal grease filter
These instructions apply to several appliance models. It
is possible that individual features are described that do
not apply to your appliance.
9 WARNING
RISK OF FIRE
Grease deposits in the grease filter can ignite.
Clean the grease filter at least every two months.
Never operate the appliance without the grease
filter.
Notes
▯ Do not use any aggressive, acidic or alkaline cleaning
agents.
▯ When cleaning the metal grease filters, also clean the
metal grease filter holder in the appliance with a moist
cloth.
▯ You can clean the metal grease filters in a dishwasher
or by hand.
By hand:
Note: You can use a special grease solvent if soiling is
stubborn. You can order it via the online shop.
▯ Soak the metal grease filters in hot soapy solution.
▯ Use a brush for cleaning and then rinse the filters well.
▯ Allow the metal grease filters to drip dry.
In the dishwasher:
Note: . Slight discoloration is possible when cleaning the
grease filters in the dishwasher. This does not affect the
metal grease filter's functioning.
▯ Do not clean extremely dirty metal grease filters with
dishes.
▯ Loosely position the metal grease filter in the
dishwasher. The metal grease filters must not be
jammed in.
Uninstalling metal grease filter
1.
Open the lock and fold down the metal grease filter.
While doing this, place your other hand under the
metal grease filter.
2.
Take metal mesh grease filter out of the holder.
Note: Grease can accumulate in the bottom of the
metal mesh grease filter. Do not hold metal mesh
grease filter at an angle, otherwise grease will drip out.
3.
Clean the metal mesh grease filter.
4.
After removing the filters, carefully clean the inside of
the appliance.
Installing metal grease filter
1.
Insert metal grease filter.
Simultaneously use your other hand to grasp under
the metal grease filter.
2.
Flip metal grease filter up and snap the latch into
place.
Troubleshooting
You can often easily eliminate problems that may occur
on your own. Before calling Customer Service, take into
account the following information.
9 WARNING
RISK OF ELECTRIC SHOCK
Improper repairs are dangerous. Only an authorized
servicer may perform repairs and may replace
damaged plug and connections. Remove the power
plug or turn off the circuit breaker or fuse in the fuse
box if the appliance is damaged or not working. Call
Customer Service.
Changing LED Lamps
The hood is equipped with a lighting system based on
LED technology. The LEDs guarantee an optimum
lighting with a duration up to 10 times longer than
traditional lamps and allow for a significant power
savings as compared to traditional lamps.
For replacement, please contact the Customer Service
Department.
Loading ...
Loading ...
Loading ...