Loading ...
Loading ...
Loading ...
12 49-60815 Rev. 1
Ice & Water Dispenser (on some models)
Dispenser
with
glass-touch
controls
How it Works
The electronic controls on the dispenser are
truly interactive. The control panel is equipped
with a proximity sensor that causes the panel
to light up as you approach the dispenser
(approx. 2 inches or 50mm). To make a
selection, simply touch the graphic for the
feature you want, and the halo for that feature
will light up. When you walk away from the
refrigerator, the lighted graphics switch off
automatically.
Spill Shelf
How to Use
To dispense water or ice: select WATER ,
CUBED ICE or CRUSHED ICE . Then
press the glass gently against the top of the
dispenser cradle.
The spill shelf is not self-draining. To reduce
water spotting, the shelf and its grille should
be cleaned regularly.
If no water is dispensed when the refrigerator
is first installed, there may be air in the water
line system. Press the dispenser cradle for at
least two minutes to remove trapped air from
the water line and to fill the water system. To
flush out impurities in the water line, throw
away the first gallon of water.
CAUTION
Never put fingers or any
other objects into the ice crusher discharge
opening.
ATTENTION
Ne mettez jamais les doigts
ou d’autres objets dans l’ouverture du
distributeur.
PRECAUCIÓN
Nunca coloque los
dedos o cualquier otro objeto en la abertura de
descarga de la picadora de hielo.
Locking the Dispenser:
Touch CONTROL LOCK for
3 seconds to lock the dispenser
and control pad. To unlock, touch
it again for 3 seconds.
Dispenser Light:
This feature turns the light on
and off. The light also comes
on when the dispenser cradle is
pressed. If this light burns out,
contact factory service.
Door Alarm:
To turn the Door Alarm feature on,
touch DOOR ALARM once. To
turn it off, press it again.
When the DOOR ALARM is
active, the alarm will flash and
beep if you keep the door open
for more than 2 minutes.
Built-In Refrigerators
Loading ...
Loading ...
Loading ...