Loading ...
Loading ...
Loading ...
4
PARTS
1. Cap
2. Lid
3. Jug
4. Seal
5. Blender blade unit
6. Collar
7. Speed control
8. Bowl
9. Mill blade unit
` Dishwasher safe
PREPARATION
• Sit the motor unit on a dry, rm, level surface.
• Route the cable so it doesn’t overhang, and won’t trip or catch.
USING THE BLENDER
1. Lower the jug on to the motor unit, then turn the jug clockwise to lock it in
place (g A).
2. Pull the lid up and o the jug it may be sti because of the seal.
3. Put the ingredients into the jug. Don’t ll it past the 1500ml mark, or the
contents may force the lid o when you start the motor.
4. Put the lid on the jug, and push it down to seal it.
5. Align the pips on the sides of the cap with the slots in the hole in the lid, put
the cap into the hole, and turn clockwise to lock it. Don’t operate the blender
without the cap.
6. Check that the speed control is set to O.
7. Put the plug into the power socket (switch it on, if it’s switchable).
8. Turn the speed control clockwise (1 = low, 2 = high).
• Use low speed (1) for lighter applications, using mainly liquid ingredients, and
high speed (2) for heavier applications, using mainly solid ingredients.
• Turning it anti-clockwise to Y will give you a short burst at high speed, for
more precise control. In this direction, the control is spring-loaded. When you
let go, it’ll return to O.
• To add ingredients while the blender is working, turn the cap anti-clockwise to
unlock it, lift it o, pour the new ingredients via the hole, then replace the cap,
and turn it clockwise to lock it.
• Check that the added ingredients don’t push the volume in the jug past
1500ml.
When you have nished:
1. Turn the speed control to O, and wait till the blades stop moving.
2. Turn the jug anti-clockwise to unlock it, and lift it o the motor unit.
Loading ...
Loading ...
Loading ...