Loading ...
Loading ...
Loading ...
en Faults and what to do about them.
24
Information about the indicator lights
Faults and what to do about them.
Display* Cause/Remedy Display* Cause/Remedy
Close the washing machine door
properly; washing may be
trapped.
Motor fault. Call the after-sales
service.
Drain pump blocked; clean the
drain pump ~ Page 21
Drain hose/outlet pipe blocked;
clean drain hose on the siphon
~ Page 22
There is water in the base
trough*, the appliance is leaking.
Call the after-sales service.
Turn on the tap fully, supply hose
kinked/jammed: Clean the filter
~ Page 22, water pressure too
low.
* Depending on the model
Faults Cause/Remedy
Water is leaking from the
appliance.
■ Attach the drain hose correctly or replace it.
■ Tighten the screw joint on the supply hose.
The appliance is not filling
with water.
Detergent is not being dis-
pensed.
■ Start/Pause not selected?
■ Is the tap turned on?
■ Could the filter be clogged? Clean the filter.
■ Is the supply hose kinked or trapped?
The door cannot be
opened.
■ The safety function is activated. Wait for approx. 2 minutes.
■ $ (without final spin) selected?
■ Can be opened by emergency release only?
The programme does not
start.
■ Start/Pause selected?
■ Is the door closed?
The water is not draining. ■ $ (without final spin) selected?
■ Clean the drain pump.
■ Clean the outlet pipe and/or the drain hose.
Water is not visible in the
drum.
Not a fault – the water is below the visible area.
Loading ...
Loading ...
Loading ...