Loading ...
Loading ...
Loading ...
en Programme default settings
14
Soaking
1. Pour soaking agent/detergent into
compartment II in accordance with
the manufacturer’s instructions.
2. Turn the programme selector to
Cottons 30 °C programme.
3. Select Start/Pause.
4. After approx. 10 minutes select
Start/Pause.
5. After the required soaking time
reselect Start/Pause if the
programme is to be continued, or
change the programme.
Notes
■ Load laundry of the same colour.
■ No additional detergent is required;
the soaking solution is used for
washing.
0 Programme default
settings
Programme default settings
The spin speed for all programmes is
preset at the factory.
You can change the default settings as
follows.
0 Spin speed
The spin speed for all programmes is
preset at the factory.
You can change the default settings as
follows.
Before and while the selected
programme is running, the spin speed
or Rinse stop (without final spin,
laundry soaks in the last rinsing water)
can be set. The effects depend on the
programme progress.
The maximum selectable spin speed
depends on the model and the set
programme.
\ Additional programme
settings
Additional programme settings
G Speed*
For washing in a shorter time with a
washing result comparable to that of the
standard programme.
Note: Do not exceed the maximum
load.
Overview of programmes ~ Page 12
F Eco*
For saving energy with a washing result
comparable to that of the standard
programme.
Note: The washing temperature is
lower than the selected temperature.
For special hygiene requirements, we
recommend selecting a higher
temperature or the G Speed option.
p Easy-Iron
Special spin sequence with subsequent
fluffing. Gentle final spin – residual
moisture in the laundry slightly
increased.
O Rinse plus*
Extra rinse. For areas with very soft
water or to further improve the rinsing
result.
Z Water plus*
Increased water level and additional
rinse cycle, extended washing time. For
areas with very soft water or to further
improve the rinsing result.
(* depending on model)
Loading ...
Loading ...
Loading ...