Loading ...
Loading ...
Loading ...
5
36" (91.4 cm) Model WCE97US6H Touch-Activated Electronic Control Model shown
COOKTOP CONTROLS – ELECTRONIC TOUCH
CONTROLS
Cooktop Controls
Wi-Fi Connectivity
■ Connect to Network: Download the Whirlpool
®
app from the
app store on your mobile phone. See the Connectivity Setup
sheet for more detailed instructions.
■ SAID Code: The SAID code is used to sync a smart device
with your appliance.
The SAID code plate is located on the metal cabinet
underneath the cooktop. See the following illustration.
■ MAC Address: MAC Address is displayed for the Wi-Fi
module.
■ Wi-Fi Radio: Turn Wi-Fi on or off.
The electronic touch controls offer a variety of heat settings
for optimal cooking results.
For maximum element operation, all cooktop electronic touch
controls can be set to High when bringing liquids to a rapid boil.
When the cooktop is turned on or after power is restored to the
cooktop after a power failure, all temperature setting lights will
glow for 10-15 seconds. After the lights go off, the cooktop is
ready to use.
To Use:
1. Touch ON/OFF for the desired element.
2. Touch the UP or DOWN keypad to select the power level.
Hold
3 sec
WifiTimer
B
A
H
G
F
E
C
D
WARM ZONE
DUAL ELEMENT
TRIPLE ELEMENT
ON
OFF
ON
OFF
ZONE
SIZE
ZONE
SIZE
ON
OFF
OK
ON
OFF
WARM
ZONE
A. Ceramic glass cooktop
B. 6" (15.2 cm) single element
C. 12"/10"/6" (30.5 cm/25.4 cm/15.2 cm)
triple element
D. Right rear warming zone
E. 6" (15.2 cm) single element
F. Control panel
G. 10"/6" (25.4 cm/15.2 cm)
dual element
H. Model and serial number plate (located
underneath cooktop on metal cabinet)
AB
A. Model/serial number plate
B. SAID code for Wi-Fi connection
WARNING
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
Loading ...
Loading ...
Loading ...