Loading ...
Loading ...
Loading ...
Setting the Clock
Note: The time of day must first be set in order to operate the oven.
To Set the Clock
The _ pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been
preset at the factory for the 12 hour operation. When the appliance is first plugged in, or when the power supply to the
appliance has been interrupted, the timer in the display will flash.
Press _ pad to get the timer and ovens ready to use.
To set the clock
1. Press ('_ pad. "CLO" and the current time of day will appear inthe display.
2. Press A or V pad to set the correct time of day. Wait 5 seconds. The new time of day will appear in the display.
Changing Between 12 or 24 Hour Time of Day Display:
1. Press and hold (_ pad for 7 seconds. "CLO" and the current time of day will appear in the display. A beep will
sound and "12h" or "24h" will appear in the display.
2. Press J_, o V pad to switch between the 12 and 24 hour time of day display. The display will show either "12h" or
"24h'.
,t.___..,,
3. Wait 5 seconds to accept the change or press _ pad to reject the change.
4. Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was
chosen, the clock will now display time from 0:00 through 23:59 hours.
To Set the Minute Timer
The _ /t pad controls the Timer feature. The Timer serves as an extra timer in the kitchen that will beep when the set
time has run out. Jtdoes not start or stop cooking. The Timer feature can be used during any of the other oven control
functions, except during a self clean operation.
To set the Timer
1. Press _ad. "-- --" will appear and "TIMER" will flash in the display.
2. Press A or V pad to set the desired time in the display. Wait 5 seconds and the time will begin to count down
with the set time and "TIMER" will stay in the display.
3. When the set time has run out, "End" and "TIMER" will show in the display. The clock will sound with 3 beeps every 7
seconds until pad is pressed.
To cancel the Minute Timer before the set time has run out: Press pad. The display will return to the time of
day.
To Set Add 1 Minute Feature (some models)
When the pad is pressed, 1 minute is added to the Minute Timer feature if this feature is already active. Jfthe
Minute Timer feature is not active and the Ai te pad is pressed, the Minute Timer feature will become active and will
begin counting down from 1 minute.
Loading ...
Loading ...
Loading ...