Loading ...
Loading ...
Loading ...
Control Pad Features
Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions are
the same. Also, pads may be shaped differently than those appearing in this Use and Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
Oven interior Bake Pad-- Broil Pad-- CookTime
Light Pad-- Used to Used to Pad--Used to
Used to turn select select the enter the length
oven interior light the bake variable broil of the baking
ON and OFR function, function, time.
Hold Pad-- X \ \ /
Used to setX \ UPPEROVeN /
the Warm & '_ \ _ /
Hold feature.,,. _ t_\ i _ _k
_"_} I _Oke I BFO'_ I time
Select Clean _
Pad-- Used_
to select the Seleot_'w /_
Self-Cleaning_Sl%_°_ I _o,_& _ST_)P) Dt1?tY
cycle. A 2, 3 or 4 /_ I
hour Self-Clean / _t _,
time may be _ I
so,octo
/ n_lAv
DELAYSTART
Stop Pad-- Used to clear any
function previously entered
except the time of day and
minute timer. Press STOP to
stop cooking. Also the STOP
pad is used to activate oven
lockout setting.
PAD--Used to set
the desired start
time for baking or
cleaning. May be
used with COOK
TIME to program a
delayed bake cycle.
Temperature Visual Display
UPand DOWNARROWSPADS--Used Oven
along withthe functionpads toselectoven Interior
temperature, cook time, starttime (when Light Pad
programming an automaticstarttime), / Broil
timeof day, cleantimeandminute timer./ Bake Padpare. d
L hke I Broil
#
CookTime Pad
(some models)
Cook
Time
............................I
Pad--Used
to set the
time of day.
Select Warm & {<:_1
Clean I Hold
Select Clean Pad (some models) Warm &
Add 1 Minute Pad--Used to add 1 minute Hold Pad
to the Timer Countdown. This feature works (some
with the Kitchen Timer only and does not models) Stop
affect any cook time or start time functions Pad
(some models).
Delay
Start
Delay
Start
Pad
(some /_'_
models) _Ji_
Timer Set/Off Pad--Used to set or cancel the minute timer. The minute timer does not start
or stop cooking. Also, TIMER SET/OFF Pad is used to set the Continuous Bake Feature.
Your oven is equipped with a temperature visual display. When a cooking mode is set, the actual temperature will be
shown in the display and will rise as the unit preheat. When the unit has reached its target temperature, a chime will sound
to remind you to place the food in the oven. This feature will be active with a mode: BAKE.
For a silent control panel:
The pad controls the Silent Control Panel feature. The Silent Control Panel feature allows the oven control to be
operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and
later returned to operating with all the normal sounds and beeps.
To change control from normal sound to silent control operation or from Silent control to normal sound operation
1. Press and hold pad for 6 seconds. A beep will sound, "-- -="will appear, "UPPER" and "DELAY" will flash in the
display. After 6 seconds, a beep will sound and "SP" (speaker) or "=="will appear in the display.
2. Press _ or v pad to switch between normal sound operation and silent operation mode. If "SP" appears, the control
will operate with normal sounds and beeps. If "=="appears, the control is in the silent operation mode.
3. Wait 5 seconds to accept the change or press _ pad to reject the change.
Temperature Conversion (Fahrenheit / Celsius)
The pad controls the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display
temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit. Note: both ovens
will be changed at the same time.
To change display from Fahrenheit to Celsius or Celsius to Fahrenheit
1. Press pad and hold for 6 seconds. A beep will sound, "-=" will appear "UPPER" and "BROIL" will flash in the
display. After 6 seconds a beep will be heard and "F" or "C" will appear in the display. If "F" appears, the display is set to
show temperatures in Fahrenheit. If "C" appears, the display is set to show temperatures in Celsius.
2. Press A or V pad to switch between Fahrenheit or Celsius display modes. The display will show either "F" or "C".
3. Wait 5 seconds to accept the change or press _ pad to reject the change.
7
Loading ...
Loading ...
Loading ...