Loading ...
Loading ...
Loading ...
91
[ER16800( M)01/96]
❑
Lower the vehicle until the tire touches the
ground, and tighten lug nuts in the same
sequence to the specifications shown in the
chart below.
[ER17000( M)01/96]
❑
Finish lowering the vehicle and replace any
wheel covers, ornaments, or hub caps that
your vehicle has. Make sure that they are
snapped into place.
[ER17200( M)01/96]
❑
Put the tire, jack, and wrench away. (Make
sure jack is securely fastened so it doesn’t
rattle when you drive.)
*
[ER17300( M)01/96]
R WARNING
Make sure the spare tire and jacking
equipment are stowed and secured in the
proper storage location.
[ER17500( M)01/96]
❑
Unblock the wheels.
[ER17800( M)01/96]
Retighten the wheel lug nuts to the specified
torque at 100 miles (160 km), and again at 500
miles (800 km) of new vehicle operation and at
the intervals specified in the Maintenance Schedule
and Record booklet.
*
[ER17900( ALL)01/96]
Also retighten to the specified torque at 500
miles (800 km) of operation after any wheel
change or any time the lug nuts are loosened.
*
[ER18000( ALL)01/96]
R WARNING
Failure to retighten wheel lug nuts at
mileages specified could allow wheels to
come off while the vehicle is in motion.
File:10lterm.ex
Update:Fri Dec 13 11:23:45 1996
Loading ...
Loading ...
Loading ...