Loading ...
Loading ...
Loading ...
96
%
*
[ER22400( ALL)01/96]
Removing jumper cables
*
[ER22500( ALL)01/96]
1. Always remove the jumper cables in the
reverse order. Remove the negative (S) end
of the jumper cable from the metallic surface
on the engine or frame of the disabled
vehicle.
*
[ER22600( ALL)01/96]
2. Remove the negative (S) cable from the
booster battery.
*
[ER22700( ALL)01/96]
3. Remove the positive (+) cable from the
booster battery.
*
[ER22800( ALL)01/96]
4. Remove the other end of the positive (+)
cable from the discharged battery.
*
[ER22900( ALL)01/96]
After the vehicle is started, let it idle for a while
to let the engine “relearn” its idle conditions.
Drive it around for a while with all electrical
accessories turned off to let the battery recharge.
Driveability may be deteriorated slightly until all
drive modes are “relearned.” You may need to
use a battery charger to fully recharge the
battery.
*
[ER23000( ALL)01/96]
If you need to replace your battery, see Battery
in the Maintenance and Care chapter.
File:10lterm.ex
Update:Fri Dec 13 11:23:45 1996
Loading ...
Loading ...
Loading ...