Loading ...
Loading ...
Loading ...
PRIUS_OM_OM47A29U_(U)
385
4-5. Using the driving support systems
4
Driving
When the Simple Advanced Parking Guidance System cannot be
operated, or when operation is stopped, canceled, etc., the one of the
following message is displayed on the multi-information display. Take
appropriate action according to the display.
■ When it is not possible to operate
Multi-information display messages
Message Situation•Handling method
The system may be malfunctioning.
→ Turn the power switch off and then to ON
mode.
Have the vehicle inspected by your Toyota
dealer if the message is displayed again.
There may be a system failure.
Power steering equipment is temporarily overheat-
ing.
→ Turn the power switch off, wait for a little
while, and then turn the power switch back to
ON mode.
The power switch is not in ON mode.
→ Turn the power switch to ON mode.
Ice, snow, dirt, etc., has adhered to the sensor.
→ Remove any ice, snow, dirt, etc.
The sensor is frozen.
→ Once the sensor thaws, the system will return
to normal.
The battery has been removed and reinstalled.
→ Drive the vehicle straight ahead for 5 seconds
or more at a speed of approximately 22 mph
(35 km/h) or higher.
The S-APGS switch is operated when the vehicle
speed exceeds 16 mph (30 km/h).
→ Operate the switch when the vehicle speed is
approximately 16 mph (30 km/h) or less.
Loading ...
Loading ...
Loading ...