Loading ...
Loading ...
Loading ...
4
6
5
Control Panel and Features
2
SOIL LEVEL
Select the setting most suitable for your load. For heavily
soiled and sturdy fabrics, select Heavy Soil Level for more
wash time. For lightly soiled and delicate fabrics, select
Light Soil Level for less wash time. A lighter soil-level setting
will help reduce tangling and wrinkling.
TEMPERATURE
Temperature senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following
the garment label instructions, use the warmest wash
water safe for your fabric.
■ On some models and cycles, warm and hot water may
be cooler than your previous washer.
■ Even in a cold and cool water wash, some warm water
may be added to the washer to maintain a minimum
temperature.
RINSE
The following options may be selected for most cycles.
ONE RINSE
This option is used to limit a cycle to one rinse.
2ND RINSE
This option can be used to automatically add a second
rinse to most cycles.
WASH CYCLE KNOB
Use the Wash Cycle knob to select cycles on your washer.
See “Cycle Guide” for detailed descriptions of cycles.
START/PAUSE BUTTON
Press to start the selected cycle; press again to pause the
cycle and unlock the lid.
NOTE: If the washer is spinning, it may take several
minutes to unlock the lid. Press and hold for 3 seconds
to cancel a cycle.
1
2
3
4
CYCLE STATUS LIGHTS
The Cycle Status Lights show the progress of a cycle.
At each stage of the process, you may notice sounds or
pauses that are different from traditional washers.
SENSING FILL
When the START/Pause button is pressed, the washer will
ll to an initial water level and begin sensing to determine
the load size. The washer will then continue lling to the
appropirate water level based on load size and proceed to
Wash.
If the lid is opened or the START/Pause button is pressed,
the cycle will pause. Closing the lid and/or pressing the
START/Pause button will resume the cycle. If the cycle
remains paused with the lid open for 10 minutes, the
washer will pump out the water.
WASH
You will hear the agitator moving the load. The motor
sounds may change at different stages in the cycle.
Wash time is determined by the selected soil level.
RINSE
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load. You may hear the
motor turning on briey (short hum) to move the basket
while lling.
SPIN
The washer spins the load at increasing speeds for
proper water removal based on the selected cycle.
DONE
Once the cycle is complete, this light will come on.
For best results, remove the load promptly.
5
6
Not all features and options are available on all models.
Appearance may vary.
3
1
4
Loading ...
Loading ...
Loading ...