Loading ...
Loading ...
Loading ...
9
2. Place the mounting plate onto the
base of the oil heater, between
the last two fins at each end.
3. Remove the wing nuts provided
from the U bolt assembly.
4. Hook the U bolt around the body
section, joining the last two fins,
and feed each end back up
through the top of the mounting
plate. Secure the U bolt to the
mounting plate with the plastic
wing nut provided.
5. Repeat at the other end of
the heater.
6. Return the unit to an upright
position, and it is now ready for use.
Turning Your Heater On
Always place the heater on a firm,
level surface in a stable upright
position and unwind the cord to its
full length.
Ensure the Heat Setting switches are
switched to the ‘OFF’.
Plug the cord into a 230V or 240V
power point and switch on.
NOTE: To avoid an electrical
circuit overload, it is
recommended that no other
appliances are plugged into
the same circuit as your heater,
when it is in use.
Setting The Heating Mode
All Kambrook oil heaters operate in
manual heating mode only, except
for the KOH111 which can also
operate using the programmable
timer. To operate the KOH111 using
the programmable timer, see the
‘Setting the Auto-Off Timer’ section.
The oil heater has two switches,
offering three heat settings.
LOW
MED
HIGH
Setting KOH105 KOH107 KOH111
LOW
MED
HIGH
400W
600W
1000W
600W
900W
1500W
1000W
1400W
2400W
Loading ...
Loading ...
Loading ...